Page 87 - Lion - Trade 56

Furry Feel Fabric
7813E Trafalgar
Sports Ball Clips
Cricket Bat Clips
One-piece acrylic clip to hold a cricket bat securely and discretely. Can hold a bat flat side out or wedge side out. Bolted through the backing board for strength. Bat is laid into the clip
toe first. To help ease the handle in, always use a strip of mylar or similar wrapped around the grippy rubber handle cover. 4.5mm acrylic.
Normal, for bats with toes up to 28mm approx. thick, which is most of them.
Extra, for bats with extra thick toes such as by Duncan Fearnley, up to 38mm approx.
Handle sizes vary. If it seems tight in the neck clip, don’t force it, as it might break. Use a block and fine sandpaper to smooth the inside edges of the clip. This opens up the gap and allows the handle to slide in. Supplied with all fixings and instructions.
See our Extra Deep rebate mouldings in the Lion Mouldings catalogue.
PUB034
5960 Cricket Bat Clip Normal toe £43.28
5238 Black
Tactile and flexible self- adhesive fabric for 3D framing. 700mm x 5m or 685mm x 10m rolls.
As stock rotates rolls changing to 10m.
5238 F F Fabric 7813E F F Fabric
5962
685mm x 10m roll 700mm x 5m roll
£87.39 £47.25
Miniature Cable Ties
5962
Pass the tail through the little block and a little ratchet holds it tight.
Ideal for holding many types of small objects into box frames. Make holes in the base, push the tail through, round the object and back down through the hole and into the block. Pull until tight.
In natural which can be toned with a marker pen, and silver/grey. 2.5mm wide.
5386 Natural 100mm 100 £1.66 5387 Silver/Grey 100mm 100 £1.66 5388 Natural 160mm 100 £2.58 5389 Natural 200mm 100 £2.76
PUB035
5964
5963
An easy and neat way to mount sports balls.
Carefully shaped from 3mm clear acrylic. One screw fixing into backboard.
5962 BallClipCricket&Baseball 5963 Ball Clip Tennis
5964 Ball Clip Golf
£12.57 £12.57 £11.17
7115
5961 Cricket Bat Clip Extra toe
£43.28
Acrylic Ball & Object Display Cases
Framing sports balls is very popular
Our range of acrylic cases are designed specially for the purpose. Making up your own base trims with picture moulding helps you to personalise them.
The football and rugby cases are quite large and very fragile. The prices shown for those include a £10 safe packing charge.
Internal dimensions of cases, L x W x H mm, are as shown. All are approximate.
The ball cases come complete with fabricated black acrylic bases and are ready to use.
See website for more detailed measurements.
The base trims shown are made from Lion mouldings. They are not included with the cases.
6932
Football
Rugby Ball
270x270x255mm 280x260x340
Tennis Ball Golf Ball
100x100x 75 x 75 x 100mm 75mm
7703
6932 Football
7115 Rugby ball
7116 Tennis ball
7117 Golf ball
7703 Acrylic tent for plaque
£103.64 £114.27 £25.66
£19.94 £5.99
Tent for plaque
Each face 115 x 22mm
7116
7117
Dimensions shown are external
Check stock & order 24/7: lionpic.co.uk
87
Object Framing
Sports Ball Clips
5962
Designed to mount golf, tennis, cricket & baseballs to a backing board for framing.
Kits consist of:
One piece of formed acrylic.
Countersunk bolt and washers.
Fixing Sports Ball Clips
PUB 035
Fit the ball into position. With one arm facing upwards, place the ball onto the two bottom arms (where you approximately want it to finally sit; i.e., the seam of a cricket ball), and holding the top arm, carefully flex this up to allow the ball to be ‘rolled’ into the position in the cradle of the three arms. The two bottom arms will also flex a little to ensure no big strain is placed on any one ‘arm’.
Care should be exercised to not scratch the ball.
Tennis
LION Picture Framing Supplies Ltd 148 Garrison Street, Birmingham B9 4BN Tel: 0121 773 1230 Fax: 0121 771 2540 Open 08.45 - 17.00 Monday to Friday
lionpic.co.uk
Once in the clip, the ball can be maneuvered into final position with reasonable safety from scratching.
See current LION Trade catalogue
Ball Clip
Baseball
Secure the clip to the backing board in the desired location. If fixing to hard board (masonite / mdf etc), use the countersunk bolts with the small flat washer 2mm app.
5962
If fixing to foam core board or similar softer material, then the larger 25mm flat washer should also be used on the back to spread the load. Cut off excess tank bolt thread once the mount is securely attached.
info@lionpic.co.uk
Any prices quoted are correct as at April 2017. Please check before ordering.
PUB002 Search it on our website
Golf
Cricket
V.4 04/2017
5963
5964