Page 18 - Lion - Trade 56

18
Made in Italy
U200 - A superbly engineered foot-operated underpinner for smaller bespoke workshops
• Joins mouldings up to 125mm wide and 80mm tall
• Maximum distance between v-nails
180mm, wider than many other models
• Uses Alfa PTM v-nails, inserted via different sizes of v-nail block. 7mm, 10mm & 12mm blocks supplied. 5mm & 15mm blocks
also available.
• Sturdy steel stand. Work from front or back.
• Adjustable working angle, useful when working with larger frames
• Spring-pin adjust top pressure pad, supplied with ‘L’ head
• Solid steel v-nail insertion hammer for longevity
• Front and back v-nail stops
• Fixed back fences
• Optional support wings available
• Easy to maintain
• Working height 1150mm, 38kg, base 380 x 600mm
7012
7009 Alfa U200
7012 Mouldings support wings set
See PUB089
£770.00 £157.94
U200 & U300 both
supplied with 7mm, 10mm & 12mm packs of PTM V-nails
All Alfamacchine U-Series and Minigraf underpinners use PTM V-nails, p.21
Check best prices: lionpic.co.uk
Features common to most U Series Underpinners
• Use Alfamacchine Power Twist PTM v-nails
• Spring pin adjustable top pressure pad
• Solid steel v-nail insertion hammer
• Rebate pusher supplied. Sprung Claw version,
7838, available as optional extra for even
better joins, see p.22
• Requires air compressor and filter-lube-
regulator, see p.23
• Optional moulding support wings available.
See PUB087
Excellent air-op bench top underpinner for bespoke framers looking to step up from a foot operated machine.
• Joins mouldings up to 60mm wide and 80mm tall. Maximum distance between v-nails 80mm
• Uses Alfa PTM v-nails, inserted via different sizes of v-nail block. 7mm,
• 10mm & 12mm blocks supplied. 5mm & 15mm blocks also available.
• Top pressure pad pulled down by twin pistons for maximum stability,
particularly when joining harder woods. Moulding stays clamped
through joining cycle
• Front and back v-nail stops plus unique air clamp which locks v-nail
carriage to insert v-nail at any point in between
• Working height - 300mm above bench. Base 300 x 480mm. 32kg
• Options: Tilting Stand, Moulding Support Wings.
7010 Alfa U300
3844A Mouldings support wings set 7059 Tilting Steel Stand
£1,395.00 £144.59 £275.00
Ordering information on p.193
ALFAMACCHINE U200 & U300 Underpinners