Page 36 - Lion - Trade 56

LAF3 Air-op Flexi driver
The Lion LAF3 air flexi driver fires standard 15mm flexis, Standard or Semi-rigid. Specially engineered nose-plate allows flexis to be fired almost flat, just 10°.
PCL airline connector supplied as standard
• Side loading 105mm magazine takes strips up to 300 flexis
• Special nose plate loosens easily to clear jams
• Engineered to fire almost flat, just 10°
• Die-cast aluminium body, 0.85kg,
9985
See Flexipoints, p.35
195 x 165mm approx..
• Rubberised hand grip
• Operates at 4-7 bar/ 70psi. Connect to
separate regulator
• Full parts and service support
• CE and GS marked
9985
LION LAF3 Air-op Flexi Driver
£69.00
7702 7828 2723
INMES FI-150M Hand-Operated Flexi Driver
A manual flexi driver ideal for bespoke framing workshops.
• Fires 15mm x 0.40mm Flexis. Standard are easily bent up to allow a frame back to be removed. Bendable are best for picture frames with fixed backs.
• Die-cast body and carefully engineered for reliability. Soft grip handle.
• Quick release for easy front loading.
• Firing pressure adjustable to suit different
woods.
7793 Inmes Fi-150M Flexi Driver 6728 INMES Flexis Standard 7828 Flexis Semi-Rigid
£40.81 5000 £10.40 6000 £15.75
6728
7828
Save 10% - Order any 3 boxes or more of the same part no. of flexis
15mm x 0.40mm
Elpa Brad Drivers
539
4591
See flexis, p.35
Standard
Air Flexi Driver
The OMER 53.4 air flexipoint driver fires
15mm x 0.40mm Standard and Bendable flexis.
It is heavy duty with a stronger hammer for greater durability in high volume production. 0.60 kg.
In our experience, most drivers only fail after being dropped and this is not covered by warranty. You should always suspend them over the work bench using a tool balancer, p.38.
Fire T-headed brads. Strongly made of steel. The firing power can be adjusted. Very quick and easy to load.
The brads come in bonded sticks, p.35
6 month guarantee, but not if dropped!
432 Elpa F-12 T-head Brad Driver 539 Elpa F-18 T-head Brad Driver
Digital Caliper Gauge
Quickly measure back width of moulding or thickness of mountboard
Measuring range: 0-150mm / 6”
As a framer, you will always need to measure the back width of wood moulding when setting your Morso measuring stop. Also, it is often helpful to measure the exact thickness of mountboard.
7414
540
£67.63 £67.63
4591 OMER 53.4 Heavy Duty
3375 Spare hammer for OMER drivers 9671 OMER Gasket Service pack
3375
£361.46 £46.18 £20.32
Two-way side exit nose plate for speedier production
Semi Rigid
Air Point Drivers & Staplers
Air supply to these should always have a separate adjustable filter/regulator. They operate at a lower pressure than an underpinner.
Always use a Tool Balancer, p.38, for operator efficiency and to minimise the risk of dropping.
Such damage is not covered by warranty.
Switch between Metric and Imperial and measure up to 150mm / 6". Moulded in durable carbon fibre composite and with auto-shut off, it’s an valuable tool around your workshop.
9581 Caliper Gauge, digital £10.29
Ordering information on p.193
36
Flexi & Brad Drivers