Page 44 - Lion - Trade 56

44
COLD Laminators
Easymount 650 Laminator
COLD & Hot Mounting & Laminating
You may be an owner of a flat bed, heated vacuum or roller press and are often not using it
regularly. Which means that that you are missing out on significant revenues.
Of course, you can always use cold sticky self-adhesive boards and a brayer roller. See our range on p.42.
If you do have your own equipment, then we can help you refresh your mounting and laminating skills.
Equipment and materials:
Check that the equipment you have
is clean and working and that there
is adequate preparation space
nearby. Make a note of what rolls
of mounting and laminating film you have in stock. If you have a heated press, you will need Dry Mount Tissue, DMT, see p.48 and over-laminating films, plus silicone release paper. If it is a cold roller machine, you will need cold mounting film (twin release is easier to use).
The SeaLion Easymount 650 laminator works with most cold mounting and over-laminating films. Including SeaLion, Drytac, Hot Press, Biedermann, Zenith and others.
• 670mm working width, so takes sheets, boards and rolls up to 650mm wide
• Big 65mm dia silicone rubber rollers
• Takes panels up to 15mm thick, with
easy set twin board thickness adjuster knobs
• Magic Eye for operator safety
• In auto mode, it stops the rollers
• In foot-switch mode, it bleeps and slows the rollers’
• Adjustable roller drive speed
• Forward - Stop - Reverse switch
• Big ‘push to stop’ emergency button
• Fitted with unwind roller holder, with adjustable
You and your colleagues may welcome new or refresher training on the basics of the mounting and lamination processes. Check with Jack Siwinski at Lion in Birmingham, jack@lionpic.co.uk
Surface Mounting of Prints & Graphics to panels
Personalised Refresher Training:
tension
• 850mm x 300mm x 450mm tall. 35kgs
• 240v, single phase. CE marked
6271 SeaLion Easymount 650
4
5
1 Clear Over-laminating Film, p.46
2 Print on paper
3 Twin Release Mounting Film, p.45
2
4 Substrates, p.43
5 Sub-frame system, p.51
Do not bond a SUB Frame to paper or cardboard. Apply film laminate first, p.46
Face Mounting Prints to Clear Acrylic Panels
3
4
5
1
3
1 Clear Acrylic Panel, p.43 1 2 Optically Clear
Mounting Film 2 KOC, p.45
3 Print on smooth paper
4 White backing film C9, p.46 5 Sub-frame system, p.51
PUB007
£720.00
Hot Top Roller Laminators
Work sheet-to-roll or roll-to-roll as required. Pivoting feed tray allows speedy roll changing. Small footprint, innovative design.
• Laser-eye at the nip and two emergency stops make it super safe.
• Programmable control board adjusts speed up to 6m/min and temperatures up to 60¬∫C. Max roll o/d 230mm.
• Works very well with all cold materials.
• Single chassis construction has extra roll storage, and is on
castors.
• 2060 x 820mm / 2500 x 820mm. 1530mm tall. 210kg / 257kg.
• 230v/50-60Hz/8 amp.
7808 Atlas HA laminator 1.65m £9,000.00
7809 Atlas HA laminator 2.10m £11,500.00
Ask us about other Atlas models: C, HT and MF series
Ordering information on p.193
Cold Laminating