Page 6 - Lion - Trade 56

Available with 1ph or 3ph motor. 135kg.
9119 Morso E-H Digital
Super smooth cuts on wood and ps mouldings without noise, dust or air supply
• Hydraulically operated moulding clamps and rebate supports
• Cutting head auto advances in adjustable steps
• Interlocked safety
switching for operator safety
• All fitted with second stop, for quick cutting of longs and shorts
• All use same Rockwell HR64 steel blades, except EHXL
Morso E-H 3415 The original electro- hydraulic mitre cutter PUB020
Morso E-H-T 4866 Similar to E-H, with upgraded power pack for faster cutting cycles PUB020
Morso E-H Digital 9119 Similar to E-H, with full control from the digital screen PUB019
Morso E-H-S 7294 Same engineering as E-H, with the power pack positioned remotely, so even quieter
E-H Electro-Hydraulic Mitre Guillotines
The Morso E-H Digital has the same working characteristics as the Morso E-H, but all adjustments are made via the digital screen.
• Adjustment between three lengths of stroke
• Adjustment of cutting cycle with two cuts for narrow mouldings and more cuts on wider
mouldings.
• Adjustment for harder or softer wood.
• Automatic switch-off after a certain time.
Morso E-H Digital is delivered with two-hand release operation, safety guard, sliding longitudinal stop, second stop, waste chute.
• Includes moulding support table for the left side, measuring scale to 1500mm, adjustable fence, adjustable and automatic rebate supports and clamping cylinders.
E-H Digital
9119
See PUB019
E-H
3415
E-H-T
4866
£13,200.00
E-H-S Noiseless
See PUB020
7294
Remote power pack
Morso E Green 9880 The only all-electric mitre guillotine. 3ph only PUB084
E Green
1500mm 3ph
E-H-X-L
5573
5541
See PUB021
Morso E-H-X-L 5541 The big one. It cuts mouldings up to 250mm tall and 150mm wide. Special blades have 5 bolts.
Tellus Hydraulic Oil
Most E-H guillotines use Tellus hydraulic oil. This should be changed when the machine is serviced each year.
9880
3958 Tellus hydraulic oil 6 lt £28.70
Try Morso F and E-H-S in our warehouse
See PUB084
Mitre cut mouldings without noise or dust
Two super-sharp blades set at right angles to slice through the moulding.
Morso Mitre Guillotines - made in Denmark by DanList for over 100 years.
www.morso-guillotines.dk
Ordering information on p.193
Max moudling. width Max moudling. height Blades
Right hand measure Power
Frames per day Weight
Part Number
E-H Digital
100mm 180mm
3 bolt 1.5m
1ph & 3ph 1200 135kg 9119 £14,580.00
E-H
100mm 180mm
3 bolt 1.5m
1ph & 3ph 800 135kg 3415 & B £8,500.00
E-H-T
100mm 180mm
3 bolt 1.5m
1ph & 3ph 1200 135kg 4866 £10,000.00
E-H-S
100mm 180mm
3 bolt 1.5m
1ph & 3ph 800 135kg 7294A & B £9,600.00
E-Green
100mm 180mm 3 bolt 1.5m
3ph
800 135kg 9880 £8,750.00
E-H-X-L
150mm 250mm
5 bolt 2.5m
415v 3ph 800** 267kg 5541 £13,000.00
6
Morso Mitre Cutting