Page 12 - Lion - Trade 56

12
Fast, accurate and safe cutting of a wide variety of aluminium frame and sub-frame profiles.
The MT481 saw is ideal for users cutting around 40 frames per day.
TCT blade, 250mm, cuts up from below, so vibration in the blade is absorbed by the unseen and sturdiest part of the profile before it cuts through the top face. This gives a very neat and precise join. Pre-set positions for 45o left, 90o and 45o right cuts.
Unique blade action and a stout polycarbonate cover means that swarf and offcuts are deflected back into the waste chute. They don’t whizz around the workshop at lightning speed as can be the case with normal single blade mitre saws.
• Adjustable pneumatic clamp with polymer face secures most profiles up to 54mm tall and 50mm wide. Check with our technical department if your profiles approach either dimension.
• Quickly and accurately mitre-cut or straight-cut aluminium pieces up to 1000mm. Scales system helps you set the adjustable stop to allow for different profile widths.
• 0.75hp direct-drive 3000rpm single-phase motor is low-noise.
• Offcuts fall down chute into box for disposal. Blow gun for clearing work surface.
45°
90° 45°
Check best prices:
250 x 30mm blade
Try in our showroom
PUB057
9563 Inglet MT481 Mitre Saw £4,480.00 9571 Left hand support 1000mm £214.18
MT481 Single Mitre Saw for Aluminium Profiles
lionpic.co.uk
The Inmes IM-30 is a reliable and accurate single mitre saw for wood and polymer mouldings. Ideal for busier bespoke and smaller volume framing workshops.
The IM-30 powered single blade mitre saw can be an excellent alternative to a mitre guillotine for cutting many mouldings including harder woods, awkward profiles and delicate finishes.
There are trade-offs in terms of noise and some dust generated, as well as some limitations in the types of wood that can be cut well.
300 x 30mm blade
INMES IM-30 Single Mitre Saw
6837
• Max moulding width 100mm / 4”, max moulding height 74mm / 2.9”
• Uses 300 x 30mm blades.
• Robust motor fitted with heavy duty double bearings to
deliver reduced vibration for more accurate
cuts, less noise and less wear.
• Integral powered dust collection
3 system,15m /min.
• Cutting quickly switched from side to side using a button on the table.
• Adjustable pneumatic horizontal clamps hold moulding firmly.
• Sliding flip-up stop can measure mitred and straight cut lengths.
• 1240mm calibrated measure & support arms each side. Further
1200mm right-hand extension available as an optional extra.
• Single phase 1hp motor, 240v 3400rpm, direct drive for quieter
operation - 99dB peak operating sound level. 102kg. Base 1350 x
770mm approx.
• Automatic instant blade brake, polycarbonate blade guard and rapid
Sliding flip-up moulding stop
Dust collector system
Inmes / Lion
3 Year
‘Peace of Mind’ Warranty
Try in our showroom
manual head release fitted.
Quick lock angle setting
IM-30 with air clamps
Spare R/hand table
R/hand Extension arm to 2340mm
£1,995.00 £95.00 £139.50 £15.19
Ordering information on p.193
Quick adjust pneumatic moulding clamp
5727
6837
9945
INM03060120 Spare dust bag
Mitre Saws