Page 120 - Lion - Trade 56

Anchor Plates, Steel
Long thin plates
pressed from heavy
gauge steel. They have
raised loops to give a 1092 firm anchorage to cord 90mm or wire when fixed
to narrow mouldings
or onto a big picture.
Fixing holes are slightly ø countersunk. Zinc
plated. 1092 is to a 3.5mm new and patented
design with hole sizes
and position allowing
easier fixing to narrower
mouldings.
Screw Eyes - Short Shank
CWH1
6kg
Screw eyes, used with cord or wire, are still a very effective hanger.
Hangers
neater look. 14 x 1
16 x 1
20 x 2
25 x 4
1-9 500 £4.38 500 £5.08 500 £5.30 500 £5.73 250 £4.40 250 £5.30 250 £5.83 250 £7.03
When used in pairs
For art on stretchers
and frames with hollow backs
These have a short shank for a
30 x 6
10+ £3.93 £4.41 £4.59 £4.97 £3.82 £4.60 £5.06 £6.18
646
£15.20 Frames with flat or papered backs £68.98
12 x 00
629 630 631 632 633 634 635 636
Price per Box 12 x 00 BP 14 x 1 BP 16 x 1 BP 16 x 1 BP 20 x 2 BP 25 x 4 BP 30 x 6 BP 30 x 6 BP
10% off 10 or more packs, same part number
1093 1092
1093
51mm
Anchor Plate 2-Hole 20 Anchor Plate 4-Hole 20
£1.85 £2.80
Rings & Clips
Passe Partout rings
Push the tails of the ring through a hole in the backing board. Open out and flatten. Put a tape over to stop them marking the print. Supplied un-assembled. Brass rings, BP tails.
646 12mm ring, 19mm clip 200 647 12mm ring, 19mm clip 1000 648 16mm ring, 19mm clip 200 649 16mm ring, 19mm clip 1000 650 19mm ring, 19mm clip 200 651 19mm ring, 19mm clip 1000 936 19mm ring, H/Duty clip 200
Screw Rings
A screw eye with a split ring through it.
The knot of cord tied to the ring lays away edge of the frame, and is less visible from Also useful for fixing chain.
Brass plated.
Fits frames with hollow backs 6mm + deep and moulding 18mm + wide. Guides speed alignment. 1.0mm steel, zinc plated
Triangle Hangers, 1-Hole
£12.80 £59.60
6925A 6925B 6925D
CWH1 hangers CWH1 Hangers CWH1 Hangers
£8.50 £30.60 £275.40
Use with wire or cord, or locate at the top centre of the frame as a direct hanger.
‘0’ is fixed with pin, ‘2’ and ‘4’
with screw or rivet.
£14.24 CWH2 Hangers £65.91
‘0’
7mm tag
‘2’
11mmtag
£15.36
from the the side.
£22.90 £23.80 £29.00
1244 1 hole Triangle 0 1244B 1 hole Triangle 0 1246 1 hole Triangle 2 1246B 1 hole Triangle 2 1248 1 hole Triangle 4 1248B 1 hole Triangle 4
1000 £16.00 200 £4.50 1000 £20.36 200 £6.96 1000 £28.77
807A 1’ 14 x 1 + 13mm 808A 2’ 16 x 1 + 16mm 810A 4’ 25 x 4 + 20mm
200 200 200
6926A 6926B 6926D
CWH2 hangers CWH2 hangers CWH2 hangers
£9.00 £30.96 £278.64
‘4’
16mm tag
807A
200 £4.01 808A
810A
Triangle Hangers
CWH3 Hangers
For most aluminium frame profiles
Four sizes come in a choice of short or long tails, to suit different widths of mouldings. Fix with escutcheon pins.
00 0 0-S
1
3
1-S
4
5
2
1274A 0 1274B 0 1276A 0 1278A 0-S 1280A 1 1280B 1 1282A 1-S
2-S
200 £2.95 1000 £10.81 200 £3.01 200 £3.09 200 £3.30 1000 £13.16 200 £3.29
3-S
1282B 1284A 1286A 1286B 1288A 1288B 1290A
1-S 2 2-S 2-S 3 3 3-S
1000 £13.16 200 £3.88 200 £3.88 1000 £15.83 200 £4.61 500 £9.67 200 £4.59
6927A 6927B
CWH3 hangers CWH3 hangers
£11.50 £41.40
Ordering information on p.193
1290B 3-S 1292A 4 1292B 4 1294A 5 1294B 5
500 200 500 200 500
£9.67
£5.63 £12.52 £8.46 £18.59
CWH Hangers Trial Pack
Only 25p per frame pair
Spaced away to
fit onto hook or nail. Slots for level adjustment. 1.0mm steel, zinc plated
Tips into the channel of most double-plate aluminium frame profiles after assembly. 1.4mm steel, zinc plated
6929 CWH Hanger Trial Pack: CWH1x20,CWH2x20,CWH3x10.
Enough for approx.
£10.19
120
Screw Eyes — Rivets
8mm
14mm
18mm