Page 134 - Lion - Trade 56

134
Hangers for cord & wire
Flanger hangers have a patented lip which ensures easy
and accurate positioning, and which spread the load along the moulding. The narrow size is perfect for large frames made from mouldings that are too narrow for a double D-ring.
Narrow
6mm x 50mm
Great for narrow mouldings
For mouldings 9mm - 12mm
2982
Medium
9mm x 50mm
For mouldings 12mm - 24mm
2983
Large
21mm x 50mm
For mouldings 24mm+
2984
The two screw holes are in the optimum positions.
Holes for the cord or wire have smooth rims to minimise chafing.
Flangers are handed and packed for easy selection. Zinc plated and complete with screws.
2982 Narrow
2983 Medium
2984 Wide
2985 Trial Bag
50 frame prs 50 frame prs 40 frame prs 1 pair of each
£19.90 £19.90 £19.60
£1.98
l Size l
Hole for Cord & Wire
£6.95 £62.55
Slip-Over Hangers
Slip over edge of the backing board.
Round hole with
‘extruded’ rim, to
minimise risk of chafing
of the cord. 6mm lip, 2910 22mm o/a. For board up
to 3.2mm. ZP or black, as available.
Sometimes known as Friction Hangers.
2910 Slip-Over Hanger, hole 100 2910A Slip-Over Hanger 1000
Wooden handle with metal blade holder and offset guide.
Uses SM02, SM03, Dexter 3 and similar blades, p.27. Side guide offset blade by
about 3mm. Easy to guide along edges of frame to trim paper neatly.
3107 Pro-Trim Trimming Knife
HASSLE-FREE Paper Trimmer Blade inset 3mm
£4.33
S-M 03
Clip-Over Hangers
17x16mm
2670
Fit over the top edge of the backing board, before it is fitted into the frame.The hanging opening has a saw tooth profile. 18mm tall.
For 2mm & 3mm boards: Black
2670A Clip-Over Hanger Blk
2670B Clip-Over Hanger Blk
2670C Clip-Over Hanger Blk
For 2mm boards only: Brass Plated
200 £5.95 1000 £23.80 10000 £190.40
200 £6.80 1000 £27.20 10000 £217.60
£28.95
1930
5986 Fleur-de-Lys paper 1000mm x 47m See brown wrapping and backing paper p.149
Moulded plastic handle, to take almost any rectangular blade.
It is inset about 3mm
from the guiding edge. See blades, p.27.
3119 Hassle-Free Paper Trimmer
£11.40
3120A 3120B 3120C
Clip-Over Hanger BP Clip-Over Hanger BP Clip-Over Hanger BP
Framing Pins
Steel pins, to a ‘veneer’ pattern to 38mm and to a ‘panel’ pattern in bigger sizes.
‘Traditional method of joining frames - they hold the moulding in place whilst the glue sets. 500gm boxes.
All quantities very approximate.
Escutcheon Pins
Small brass or brass plated pins, with oversize head. For fixing kidney plates and and similar. 500gm boxes. All quantities very approximate.
Fit-Over Hanger
Neat hangers fit over the backing board before it goes into the frame. 15mm tall. Nickel plated. Fits board 2.5 to 3mm thick.
Larger than actual size
2174 Fit-Over’ Hanger 2174A Fit-Over’ Hanger
679 25mm x 19g
680 16mm x 19g
681 19mm x 19g
682 25mm x 19g
683 30mm x 18g
684 38mm x 18g
685 44mm x 16g
6000 5000 4000 3000 1500 1250 680
£6.02 £5.92 £5.71 £5.61 £5.39 £5.59 £5.29
687 Esc. Pins
688 Esc. Pins
689 Esc. Pins
6mm x 18g 6700 9mm x 18g 4300 13mm x 18g 3600
£11.50 £8.71 £9.66
Ordering information on p.193
100 £5.20 1000 £46.80
Check best prices: lionpic.co.uk
Papering Frame Backs
Covering a frame back with paper gives a quality finish.
Roll ATG adhesive, p.114, around the edge. Then lay on brown kraft paper, p.149 or Fleur-de-Lys paper. Spray on a little water to tension the paper, but do that with care.
CWH2 Use a trimmer with an inset blade to neaten all round.
Fleur-de-Lys Cover Paper
Small repeating fleur-de-lys pattern printed brown on cream 100gsm paper.
Rolls are 1000mm wide. Use in several ways: • Face papers in high quality photo frames
• Papering frame backs
• Premium gift wrapping
PRO-TRIM Knife With inset blade
Dexter 3
Flangers / Frame Hardware
Header