Page 184 - Lion - Trade 56

184
Precision Sander Elite
Big 250mm / 10” 5kg disk, faced with fine abrasive.
Moulding cut on a hand-mitre saw is placed in the guide and pushed against the disc while it is being turned. This gives the faces a smooth finish helping you create good corner joins. Takes mouldings up to 90mm wide.
How much to sand? On each end, make three pencil marks across the face. Sand just enough to fade all the marks.
With 45° Moulding Guide and dust Removal Bar.
SIMPLE
Underpinning Head
V-Nails cannot be hammered in - they must be inserted with suitable tools.
The SIMPLE Underpinning Head fits into almost any drill stand with a 43mm opening.
Mitred mouldings need to be clamped firmly together, using a band clamp or corner clamp.
A V-Nail (sometimes called a wedge) of suitable length (max 2/3 the height of the moulding) is placed vertically on the end of the magnetic tip, sharp edge down. The point of the V should be on the moulding join line. Pull the lever steadily down to squeeze in the wedge.
You’ll find it helpful to make up three blocks of suitable height to support the other three corners while joining a frame. Drill Stand should be purchased locally.
BENCHMASTER
Frame Joiner
48mm dia
Designed for use only with softer wood mouldings
2468
28mm dia
V-Nail
£29.53
Picture shows Base Plate Clamp, which is no longer available.
6758
20mm
7144
7145
2468
SIMPLE Head Only
6072
The Pushmaster working with the Benchmaster and the Super Steel Strap Clamp or similar together form a DIY frame joining system which will give you high quality frames.
The PushMaster slips into the holder. Then, the powerful cam action squeezes V-nails into most wood picture mouldings.
Use with any band or corner clamp (not included).
BENCHMASTER 1
Joining machine complete except PushMaster, for those who want to upgrade.
6756 Benchmaster 1 kit 14728 £116.46
BENCHMASTER 2
Complete with PushMaster. Kit also includes the Wedge-Mate v-nail separating tool, 400 v-nails and a starter pack of backing nails, flexipoints and screw eyes.
6072 Precision Sander Elite #F200-2 7144 SandingDiscforF200-2 10”#F50
£173.00 £6.25
High quality saw blades which fit many popular hand mitre saws. Check your length before ordering.
4987 18tpi Blade 2494 24tpi Blade
Underpinner V-Nails V-nails in small quantities.
6757
Benchmaster 2 kit
14729
£175.00
Blades for hand mitre saws
3857
Super Steel Strap Clamp
565mm 565mm
£11.66 £11.66
For users of SIMPLE, LOGAN, KIMBERLEY, EASY, ARTMAC, BENCHMASTER, PUSHMASTER and similar hand-fed frame joiners.
For normal wood
10375mm 1000£5.20 10387mm 1000£5.40 103910mm 1000£5.60 104012mm 1000£5.80 104115mm 1000£6.00 Quantities of V-Nails are approx.
Ordering information on p.193
DIY Framing