Page 24 - Lion - Trade 56

24
Mount Cutter Maintenance
Regular calibration and cleaning of your mountcutter is essential.
Always keep it covered with a cloth when not in use,
this will keep off the
dust which settles
overnight.
KeenCut mountcutters should only be cleaned with a dry cloth and vacuum.
Stubborn marks may be removed with a damp cloth with a little detergent.
To clean Fletcher-Terry and C&H cutter bars use Lighter Fluid. Lay a piece of scrap board under the running rail to protect the baseboard and squirt fluid over the rail. Work in with tissue paper and clean off all the accumulated dirt.
When dry, spray Dry PTFE film lubricant onto the rail and work the head up and down before cleaning off all the excess. Use this also in the chute of your underpinner, etc. Silicone free.
502 Lighter Fluid 100ml £1.50 734 PTFE dry film lubricant spray 400ml £8.99
See PUB098
The professional quality F-2200 Straight Mountcutter has numerous unique features:
• Cutting head runs on Delrin bearings, guided by the chromed steel shaft. The grips on the cutting heads have a soft touch coating. Blade cuts at 52o.
• Baseboard is made of non-warping aluminium.
• Running rail made of hardened aluminium, with an ultra hard-wearing black finish.
• The blade holders slip in and out, and the bevel blade can be pre-set to depth. Bevel cut mat
Vertical Cut
Blade Holder
Slips into cutting head for quick blade change. #12 593 Included
Bevel Cut Blade Holder Slips into cutting head for quick blade change. #12 542 Included
2786
FLE12593
Try a 2200 in our demo area
Baseboard: 1500mm long, 430mm wide. Overall width with mountboard support arm: 1340mm
Adjustable Lift & Hold system Included
Super-Keen Blades
Fletcher F-2100 & F-2200 cutters use the famous
Super-Keen blades:
D S
mount and foam board up to 10mm, straight cut up to 12mm thick.
• The back mount guide has multiple pin locator holes pre-set for borders from 38mm up
Pin Locator System included
Super-Keen
2743 Super-Keen 0.012” D
2744 Super-Keen 0.015” D 2745 Super-Keen 0.015” S 2941 F-T Utility blades 90o
Utility
100 05 012 £26.00
100 05 015 £26.00 100 05 016 £26.00 100 05 004 £54.00
to 200mm. A
block sits on
the peg and
rotates, to give
fine adjustment. Gives repeatable margin setting without having to read a scale.
• Most scales on the F-2200 are metric and imperial. The difference is only in the spacing of the locator pin holes - 10mm for metric and 1⁄2” for imperial.
• Measuring stops are engineered for accuracy. The special design means they lock easily and firmly onto the guide rod.
• Adjuster knobs on the measuring stops are an ergonomic shape with a soft touch finish.
• Sight Line Cutting Gauge, included, clips on with a magnet. Use this for easier cutting by eye.
• Precision blocks are supplied for accurately squaring the back mat guide.
• Measuring stops have thumbscrew calibration.
For overall sizes of the FT-2200 range, please see our website
5605 F-2200 Mat Cutter 1200mm 04 687 £1,365.00 5607 F-2200 Mat Cutter 1500mm 04 687 £1,560.00 Imperial scale versions available to order
Sight Line Cutting Gauge included
See more: LION Mountcutter blades, p.27
Accessories for FT2100 & 2200
2786 Bevel Blade Holder 12 542 FLE12593 Vertical Blade Holder 12 593
Lift & Hold
For retrofit. Supplied as standard on new cutters.
3170 Lift & Hold
£62.00 £23.11
04 613
£63.55
Ordering information on p.193
Fletcher F-2200 Mountcutter
Header Header