6927A CWH3 Hanger for Aluminium Frames 50 pack

CWH3 Hanger - suitable for most aluminium frame profiles

Fits easily into the channel of most double-plate aluminium frame profiles. Adjusted with two screws, included. Hang CWH hangers directly on hooks or screws. No need to use picture cord or wire.

Fit CWH3 Hangers in 4 simple steps: 

1)  Slot 2 CWH Hangers into the aluminium frame. Position and mark approximately 1/3 of the way down from the top. Put one screw in an oval hole of each hanger.

2) Position and fix the hooks, place two Post-its in approximate hook positions. Check and mark hook positions on Post-its. Hold hook in position on mark. Use a light hammer to insert pins.

3) Hang frame in place on the hooks and check for general position. To adjust for level, use screw in a slot. To lock CWH Hangers in position, insert second screw in each.

4) Frames will hang flat and level on the wall - do not tip forward.

Safe working load, based on our tests: 11kg (when used in pairs)

Screws in CWH3 Square Sawtooth Hangers - screws included in this pack are sometimes slotted and sometimes cross headed. If slotted use a well-fitting flat bladed screwdriver. If cross-headed use a PH-2 screwdriver head.