Daler Standard 2mm Self Adhesive Board 1 sheet

Daler Standard 2mm Self Adhesive Board 1 sheet
£13.48 Ex Vat
Out of Stock
Next delivery overdue awaiting info

Depth: 2mm

5 or more £11.86 Save 12.00%

2106 Daler Standard 2mm Self Adhesive Board 1 sheet

Grey core board coated on one face with a cold, sticky, pressure-sensitive adhesive

Protected with a release paper, overprinted dark grey with instructions. Ideal for mounting many kinds of lightweight, low value prints.

Use with care, follow instructions on release paper. Use with a brayer roller or roller laminator.

This STANDARD self-adhesive is 2.0mm thick. Sheet size: 1120mm x 815mm / 44" x 32"

Made in UK. Use is not advised when the mounted print is to be varnished.

With self-adhesive boards, always peel back a little bit of release paper and align the item to be mounted. Then peel back more and press down as you go. Use a brayer roller to bond it down fully, rolling all over in both directions. The acrylic adhesive develops full bond over two days.

2106  Daler STANDARD Self-adhesive 2.0mm  

See also:

2104  Daler STANDARD 1.4mm Self-adhesive board  1 sheet

5014  Daler XTRA-TAK 1.4mm Self-adhesive board  1 sheet

3144  Brayer roller 200mm / 8”

Working with self-adhesive materials in cold weather? When the temperature drops remember to let self-adhesive tapes, PVA glues, boards and mounting films come up to room temperature before using them. Keep them that way for a few hours after application while the adhesives cure.

Product information updated May 2020

Mixed Sheet Despatch: Ordering sheet material from LION is easy, you don't have to order in full packs. Mix and match single sheets of mountboard and other selected sheet materials. You just need to order a mixture of at least ten sheets in total.


Please feel free to ask any questions about this product.